FIREBIRD Ink SKU: DTF-33cm-100m

DTF Rolls - Warm Peel

$105.00 $150.00 Save $45

Instant Hot Peel Technology
Film is immediately ready-to-peel once cured!

Ships Today
When ordered before 3:30 PM EST, Mon-Fri.

100% Satisfaction Guaranteed
Or your money-back, within 30-days of purchase.

Available Now!

Size: 33cm x 100m

Legendary FIREBIRD Support Included
Our DTF Masters are ready to help you optimize!

Easy and Versatile Peeling

Embrace the flexibility and efficiency our film rolls bring to your industrial printing process. FIREBIRD Warm Peel DTF film rolls adapt seamlessly, eliminating the risk of damaging your intricate designs.

Zero Powder-Sticking

With FIREBIRD Ink, pristine, sharp images are a given. Our DTF Film Rolls are expertly designed to eliminate powder-sticking, eradicating concerns about unwanted powder residues disrupting your image quality. With clean, precise transfers, our film rolls maintain the integrity of your designs, ensuring your stunning images take center stage.

Enhanced Print Vibrancy

Our DTF Film Rolls amplify the beauty of your designs. Witness a significant increase in print vibrancy as our rolls yield a broader, more dynamic range of colors. Let your designs leap off the page with extraordinary vibrancy, captivating and commanding the attention they deserve.

Print onto DTF Transfer Film Rolls

  1. Load the roll so that the matte side faces up. 
  2. Print according to ink manufacturer's recommendations, or rip profile settings.

Apply DTF Powder & Cure

  1. Feed film through DTF powder shaker/conveyor system.
  2. Set curing temperature according to your powder manufacturer's instructions.
    • If using FIREBIRD DTF Powdercure at 300°F until powder is evenly melted, gritty appearance dissipates. 

Apply Finished DTF Transfer to Garment

  1. Place cured film with printed-side down onto your garment.
  2. Heat-press the film onto garment as follows:
    • 100% Cotton or Cotton-Blend: Light to medium pressure for 8-10 seconds at 300-320°F.
    • 100% Polyester: Light to medium pressure for 10-15 seconds at 280°F.
    • Optional: Press again for 5-10 seconds with teflon or parchment sheet cover.
  3. Remove garment from heat-press platen.
  4. Allow transfer to slightly cool down before peeling film, or let sit for cold-peel application.

Note: For long-term storage of finished DTF Transfer sheets, it is best to keep them away from heat and humidity.

    Print onto DTF Transfer Film

    1. Load the transfer sheet onto printer-platen, with the matte side facing up. Tip: Always handle film by edges or corners.
    2. Print according to ink manufacturer's recommendations, or rip profile settings.
    3. Remove sheet from platen and prepare for powder-application.
    4. If recommended by your ink manufacturer, let the ink sit for at least 1 minute or hover-press for 15 seconds, before applying powder.

    Apply DTF Powder

    1. Apply powder evenly across one end of the printed side of the film.
    2. Lift and allow powder to slowly and evenly slide across the entire sheet.
    3. Gently shake and tap the film from the back, to remove any excess powder.

    Note: Our films release the excess powder very easily, so you don't have to shake the film excessively.

    Cure Powder onto Printed Film

    Cure according to your powder manufacturer's instructions.

    • If using FIREBIRD DTF Powder, cure at 300°F for 60-90 seconds on an IR conveyor, or use a heat-press to hover-cure for 4-5 minutes at 340°F.

    Apply Finished DTF Transfer to Garment

    1. Place cured film with printed-side down onto your garment.
    2. Heat-press the film onto garment as follows:
      • 100% Cotton or Cotton-Blend: Light to medium pressure for 8-10 seconds at 300-320°F.
      • 100% Polyester: Light to medium pressure for 10-15 seconds at 280°F.
      • Optional: Press again for 5-10 seconds with Teflon or parchment sheet cover.
    3. Remove garment from heat-press platen.
    4. Peel film from garment. IHP films are instantly ready-to-peel, hot or cold.

    Note: For long-term storage of finished DTF Transfer sheets, it is best to keep them away from heat and humidity.