FIREBIRD Ink SKU: Ghost-1G

FBX Ghost - Pretreatment for White, Light and Medium Colored Garments

$59.50

Ghost benefits sm

Ships Today
When ordered before 3:30 PM EST, Mon-Fri.

Size: 1 Gallon

Legendary FIREBIRD Support
Our DTG Masters are ready to help you optimize!

A Breakthrough Pretreatment Formulation for White, Light and Medium Colored Garments

FIREBIRD’s FBX Ghost™ Pretreatment is designed for DTG printing onto a wide range of garments.

  • Eliminate unsightly spray box and sun yellowing? Ghost!
  • CMYK on white cotton and 100% polyester? Ghost!
  • White+CMYK on Sports Grey, Neon Green, Sapphire and other Light/Medium-Colored cotton and blends? Ghost!

FBX Ghost is compatible with most DTG garment printers, including Brother, Epson and Ricoh.

Directions

  1. Spray between 15-40 grams (per 14x16 area), depending on the garment style and color.
  2. CONVEYOR CURE* until damp or dry to touch, at 300-250F for 40-60 seconds.
  3. Heat-press to fully dry and matte down fibers, at 315-350F for 10-15 seconds, with 40-70PSI pressure.

*If a conveyor oven is not available, air-dry for a minimum of 15 mins. Then heat-press at 300-350F, for 20-40 seconds, with 40-60PSI pressure (or until dry-to-touch). It is important to either conveyor-cure or air-dry to prevent from creating a glossy film visible on the sprayed area on the garment when only heat pressing.

Need Help?

Reach out to our Legendary FIREBIRD Support team, to let one of our DTG experts help you optimize!

Customer Reviews

Based on 1 review Write a review