DTG Ink Compatible with Brother GTX Pro B


Preloaded GTX - New Lower Price
Used GTX Pro Bulk Printers, preloaded with FIREBIRD Ink!

Ships Today
When ordered before 3:30 PM EST, Mon-Fri.

Color: Cyan
Size: 4 L

Note: The Wrench for 10 Liter bottles is now available!

Legendary FIREBIRD Support
Our DTG Masters are ready to help you optimize!

DTG printer ink compatible with Brother GTX Pro B printers, made by FIREBIRD Ink.

Maximum Opacity & Peace of Mind

  • Our GTX compatible inks provide optimal ink coverage, resulting in less ink used and significant cost savings compared to OEM inks.
  • CPSIA and OEKO-TEX certified.


  • When mixing with OEM Brother GTX ink, please note:
    • CMYK can be mixed easily.
    • White ink can be mixed at low levels.
  • Requires 8L of white ink with the first purchase, to correctly load the ink to the proper "start level" (Please see the chart below):
  • Please contact us for loading instructions.

Brother® GTX™ and pro B™ / Pro Bulk are registered trademarks of Brother International Corporation and have not produced, endorsed, warrantied, or approved the use of FIREBIRD Ink's third-party ink, pretreatment, and/or cleaning solutions which are non-genuine OEM products. FIREBIRD Ink will fully support and guarantee your 100% satisfaction, as we do with all of our products.

Heat-Press Curing:
  • Press at 356 °F for 40 seconds, with low to medium pressure.
Conveyor-Dryer Curing:
  • Adjust belt-speed and temperature, so that the ink reaches 330 °F for 30 seconds.
  • We recommend using a laser thermometer to help dial-in your settings.

Your Brother GTX™ Pro B printer is a workhorse and FIREBIRD Ink has developed a worthy ink that will deliver exceptional DTG.

Since 2020, we have partnered with one of the largest GTX Pro B printshops to run production almost everyday of the year (except weekends and holidays) AND some days on 2 shifts back-to-back. The result: over 75K total prints per printer - and counting - with happy customers and significant cost savings on ink.

"FIREBIRD Ink will fully support and guarantee your 100% satisfaction, as we do with all of our products."

-Mrs. Liu

Customer Reviews

Based on 4 reviews
Jarnail S.
Switch - trust me!

We’re rocking 6 GTX Pro bulks at the moment and we finally made the switch to firebird.

We were nervous at first - it’s a big change, thought a lot of things could go south.

But we were totally wrong and regret not switching earlier! We’ve bought over 400L so far and the quality is superior brother in my opinion. The savings are significant. Make the switch, it’s not difficult at all!

I cant ever go back to Brother inks... (Firebird is too good)

I have 2 brother GTX printers. Our bulk system has been using firebird inks only and has been AMAZING. If you want to know about how the printer handles the inks. It is perfect and I fully stand behind the quality of their inks.

The point I want to make in this review is the look and quality of ink. I have used firebird on my cartridge GTX and then had to go back to brothers inks once I ran out of chips. I literally feel like I can not use that printer any more just because how dull the brother white ink looks (to try to describe it, their white is a little more transparent.) The Firebird inks are a solid white almost like a screenprint. And the reds on the borther inks never give me a actual red color. Brothers inks are kind of dull and give me a magenta red on every color setting. The Firebird inks give me ACTUAL RED.

The last point I want to make is how much ink I use with brother inks vs firebird. I save money and use less ink with firebird. If i were to print a solid white ink graphic. I would use a ink level of 4 with the firebird inks and an ink level of 5 with brothers inks. And the firebird at an ink level of 4 STILL looks better.

I have no affiliation to Firebird. I just thought people might want to hear about this info because I have used their Inks on both the GTX Bulk and GTX Cartridge printers. I also have been screenprinting for 12 years full time and I have ran different DTG machines for 7-8 years full time. This ink is the best I have seen on DTG.

Hondo M.
Brighter! Cheaper!

I was a bit skeptical at first when I heard about this ink. I saw FB at a trade show in Vegas , Erienne was helping me, broke it all down, introduced me to a couple customers at the trade show who were using FB ink as well (big players in the industry / 35 bulks / cut n sew etc) I pulled them to the aside , asked a bunch of questions, loved everything I heard. I purchased a full set up CYMK + WHITE , all all I can say is.. its been the best decision EVER! My whites are much brighter at lower printer setting (5-3) I finally have a true RED / YELLOW! Ink cost are much cheaper than OEM and producing much better prints with FB INK than I did with OEM ink! Thanks for all the help Erienne , you rock!

Amazing INK

Amazing INK. Amazing customer service, been using this ink for a year and haven't had no problems totally recommend !